View HA17558B_4250014.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HA17558B Series
Dual Operational Amplifier
REA03D0003-0100 Rev.1.00 Dec 25, 2006
Description
HA17558B is dual bipolar op-amp with improved characteristics compared to HA17558A. It has wide bandwidth, low noise, high slew rate; wide operating voltage range and high gain characteristics. This product has a wide range of applications that is appropriate for audio application, as well as AC/DC converter.
Features
* * * * * * Wide bandwidth: 7 MHz High speed: 3 V/s Low input noise voltage: 1 Vrms Large DC voltage gain: 110 dB Operating voltage: 2 V to 18 V Package outline available in Pb free lead frame: DP-8 SOP-8 (JEITA) SOP-8 (JEDEC)
Applications
* Audio AC-3 decoder system * Audio amplifier * AC/DC converter
Ordering Information
Type No. HA17558B HA17558BF Application Commercial use Package Code (Package Name) PRDP0008AF-B (DP-8FV) PRSP0008DE-B (FP-8DGV) PRSP0008DD-C (FP-8DCV)
HA17558BRP Note: This product is designed for consumer use and not for automotive.
Rev.1.00 Dec 25, 2006 page 1 of 7
HA17558B Series
Pin Arrangement
Vout1 1 1 -+ 2 +- 8 VCC Vout2
Vin(-)1
2
7
Vin(+)1
3
6
Vin(-)2
VEE
4
5
Vin(+)2
(Top view)
Circuit Schematic (1/2)
VCC
- Input Output + Input
VEE
Rev.1.00 Dec 25, 2006 page 2 of 7
HA17558B Series
Absolute Maximum Ratings
(Ta = 25C)
Item Supply Voltage Differential input voltage Common mode input voltage Power dissipation Operating temperature Symbol VCC VEE VIN (diff) 3 VCM * PT Topr HA17558B 18 -18 30 15 670 * -40 to +85
1
Ratings HA17558BF 18 -18 30 15 385 * -40 to +85
2
HA17558BRP 18 -18 30 15 385 * -40 to +85
2
Unit V V V V mW C
Storage temperature Tstg -55 to +125 -55 to +125 -55 to +125 C Notes: 1. This is the allowable value up to Ta = 45C. Derate by 8.3 mW/C above that temperature. 2. These are the allowable values up to Ta = 60C mounting on 40mm x 40mm x 1.6mm (t) 10% wiring density glass epoxy board. Derate by 5.9 mW/C above that temperature. 3. If the supply voltage is less than 15 V, input voltage should be less than supply voltage.
Electrical Characteristics
(Ta = 25C, VCC = +15 V, VEE = -15 V, unless otherwise specified)
Item Input offset voltage Input offset current Input bias current Supply current Power supply rejection ratio Voltage gain Common mode rejection ratio Output swing voltage Output sink current Output source current Slew rate Equivalent input noise voltage Gain bandwidth product Total harmonic distortion Symbol VIO IIO IIB ICC PSRR AV CMR VOS IOSINK IOSOURCE SR VNI fu THD Min -- -- -- -- 80 85 80 10 12 -- -- -- -- -- -- Typ 0.5 5 65 2.5 100 110 100 13 14 70 45 3 1 7 0.0045 Max 3 50 250 4 -- -- -- -- -- -- -- -- -- -- -- Unit mV nA nA mA dB dB dB V V mA mA V/s
Vrms
Test Conditions RS 10 k
RS 10 k RL 2 k, VO = 10 V RS 10 k RL 2 k RL 10 k VIN(-) = 1 V, VIN(+) = 0 V, VO = 2 V VIN(-) = 0 V, VIN(+) = 1 V, VO = 2 V RIAA, RS = 1 k, 30 kHz LPF f = 10 kHz f = 1 kHz, VO = 1 Vrms
MHz %
Rev.1.00 Dec 25, 2006 page 3 of 7
HA17558B Series
Table of Graphs
Electrical Characteristics Open loop voltage gain Output swing voltage Output swing voltage Equivalent input noise voltage Input offset voltage Total harmonic distortion vs. Frequency f vs. Frequency f vs. Load resistance RL vs. Frequency f vs. Temperature Ta vs. Output Voltage Vo Figure 1 2 3 4 5 6
Rev.1.00 Dec 25, 2006 page 4 of 7
HA17558B Series
Typical Characteristics Curves
Figure 1. Open Loop Voltage Gain vs. Frequency 120 VCC = +15 V, VEE = -15 V, 100 Ta = 25C, RL = 2 k 80 60 40 20 0 Figure 2. Output Swing Voltage vs. Frequency 40 36
Open loop voltage gain (dB)
Output swing voltage (V)
32 28 24 20 16 12 8 4 VCC = +15 V, VEE = -15 V, Ta = 25C, RL = 2 k 1k 10 k 100 k Frequency f (Hz) 1M
0
5 10 Frequency f (Hz)
15
0 100
20
Equivalent Input noise voltage (nV(Hz)0.5)
Output swing voltage (V)
Figure 3. Output Swing Voltage vs. Load Resistance 30 VCC = +15 V, VEE = -15 V, 25 Ta = 25C
Figure 4. Equivalent Input Noise Voltage vs. Frequency 100 VCC = +15 V, VEE = -15 V, Ta = 25C, RS = 100 10
15
10 100
1k Load resistance ()
10 k
1
1
10 100 1k Frequency f (Hz)
10 k
3 2 1 0 -1 -2 -3 -4 -5 -6 -40
Total harmonic distortion (%)
Input offset voltage (mV)
Figure 5. Input Offset Voltage vs. Temperature 6 5 VCC = +15 V, 4 VEE = -15 V
Figure 6. Total Harmonic Distortion vs. Output Voltage 10 VCC = +15 V, VEE = -15 V, 1 Ta = 25C 0.1 0.01
20 kHz 10 kHz 1 kHz
0.001
-15 10 35 60 Temperature Ta (C)
85
0.0001 0.01
0.1 1 Output voltage VO (Vrms)
10
Rev.1.00 Dec 25, 2006 page 5 of 7
HA17558B Series
Package Dimensions
JEITA Package Code P-DIP8-6.3x9.6-2.54 RENESAS Code PRDP0008AF-B Previous Code DP-8FV MASS[Typ.] 0.54g
D
8
5
1 0.89 b3
4
Z
A
E
A1
Reference Symbol
Dimension in Millimeters
Min
e
bp
e1
c
( Ni/Pd/Au plating )
e1 D E A A1 bp b3 c e Z L
Nom Max 7.62 9.60 10.6 6.30 7.4 5.06
L
0.5 0.40 0.48 0.56 1.30 0.19 0.25 0.31 15 0 2.29 2.54 2.79 1.27 2.54
JEITA Package Code P-SOP8-4.4x4.85-1.27
RENESAS Code PRSP0008DE-B
Previous Code FP-8DGV
MASS[Typ.] 0.1g
*1
D 5
F
8
NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET.
bp
HE E
*2
Index mark
Terminal cross section ( Ni/Pd/Au plating )
1 Z e 4
*3
c
Reference Symbol
Dimension in Millimeters
bp
x
M L1
A1
L
y
Detail F
D E A2 A1 A bp b1 c c1 HE e x y Z L L1
Min Nom Max 4.85 5.25 4.4 0.00 0.35 0.1 0.4 0.20 2.03 0.45
A
0.15 0.20 0.25 8 6.5 6.75 1.27 0.12 0.15 0.75 0.42 0.60 0.85 1.05 0 6.35
Rev.1.00 Dec 25, 2006 page 6 of 7
HA17558B Series
JEITA Package Code P-SOP8-3.95x4.9-1.27 RENESAS Code PRSP0008DD-C Previous Code FP-8DCV MASS[Typ.] 0.085g
*1
D 5
F
8
NOTE) 1. DIMENSIONS"*1 (Nom)"AND"*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION"*3"DOES NOT INCLUDE TRIM OFFSET.
bp
HE E
*2
Index mark
Terminal cross section ( Ni/Pd/Au plating )
1 Z e 4
*3
c
Reference Symbol
Dimension in Millimeters
bp
x
M L1
A1
L
y
Detail F
D E A2 A1 A bp b1 c c1 HE e x y Z L L1
Min Nom Max 4.90 5.30 3.95 0.10 0.14 0.25 1.75 0.34 0.40 0.46 0.15 0.20 0.25 0 8 5.80 6.10 6.20 1.27 0.25 0.10 0.75 0.40 0.60 1.27 1.08
Rev.1.00 Dec 25, 2006 page 7 of 7
A
Sales Strategic Planning Div.
Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries.
RENESAS SALES OFFICES
Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
http://www.renesas.com
Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510
(c) 2006. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .7.0

▲Up To Search▲

Price & Availability of HA17558B

	To Download HA17558B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .